1K 기반 자동차는 단단한 하얀 강한 은폐력을 말려 빨리 페인트를 다시 끝손질합니다
제품 상세 정보:
원래 장소: | 중국 |
브랜드 이름: | FantasyColor |
모델 번호: | 1K 자동차 금속성 |
결제 및 배송 조건:
최소 주문 수량: | ≥300 리터 |
---|---|
가격: | Negotiation |
포장 세부 사항: | 1L * 18 주석/ctn, 4L * 4 주석/ctn. 우리는 다른 판지 당신의 요구에 응하기 위하여 크기를 공급해서 좋습니다. |
배달 시간: | 순서 확인의 날짜에서 10-25 일 |
지불 조건: | 비자, Paypal, T/T, 서부 동맹, MoneyGram |
공급 능력: | 15000 통 월 생산량 |
상세 정보 |
|||
브랜드 이름: | FantasyColor, Shangfu, Mt Yishili | 이명: | 1K 베이스 도료 |
---|---|---|---|
색: | 선택적인 하얀 노란, 푸른, 주문 제작된 색 | 서비스: | OEM 서비스, OEM은 환영받는, 특화, OEM &ODM입니다 |
용법: | 자동차 도료, 플라스틱피막, 공업용 도료 | 키워드: | 차 페인트 충전기 퍼티 |
특징: | 긴 지속성,고 광, 넓은 적용 범위와 좋은 레벨링, 빛나는 펄 효과, 액체성 코팅 | 신청: | 자동차, 자동차는 페인트와 자동차 도료, 자동차 페인트, 금속, 가구 페인트를 다시 끝손질합니다 |
하이 라이트: | 1K 토대 자동차는 페인트를 다시 끝손질합니다,퍼티 보디 필러 자동차가 페인트를 다시 끝손질합니다 |
제품 설명
1K Base Auto Refinish Paint , Fast Drying Solid White Car Paint Strong Hiding Power
Auto refinish paint solid white car paint rich red car paint intermediate paint custom car paint colors
Product characteristics:
SURFACE PREPARATION:
Product Name |
Putty Body Filler |
Surface Cleaning |
Remove wax,silicon and other contamination with degreaser. |
Mixing Ratio |
Ready fot use,apply with spreader.Apply a thin coat at a time. |
Drying time |
30 minutes at 20℃.Allow longer drying time for thick coating. |
Sanding Dry sanding |
Dry sanding:P400-P600; Wet sanding :P600-P800 |
Construction technology:
1. Clean&Shade
Remove wax oil and other impuritieswith deoiling detergent Examine andassess the location and extent of damage.
2. Grind damaged parts
Grinding with abrasive paper(#80# 2000). Dry grinding withsandpaper(#80, 120, 180) first.
3. Dust cleaning
Use a degreaser to remove greasefrom the workpiece.
4. Fill& Grind
Add thne hardener I proportionmix and fill the putty, Sanding(#80. 120, 180) after drying.
5. Clean &Grind
Clean the surface again, and thenfinely grind the filling to the leveof the paint.
6. Spray primer surfacer
Mix and spray primer according toproduct requirements, each layerneeds to be matte.
7. Grind primer surfacer
After the primer is dried, dry sandingpaper(3320-400)is used with atwo-way sander. Manual grindingon the edge(#600-800)
8. Clean & Wipe
Use a cleaner to clean the grease.and tack cloth to clear of dustand particles.
9. Spray 1K color paint
Add thinner as requiredspray2-3ayers, spray interval of 5-10nutes per layer.
10. Spray Varnish(clear coat)
Add hardener and thinner asrequired, spray two layerseach interval is 5-10 minutes.
11. Dry Bake
After the varnish is sprayed. it needbe allowed to stand for 10-15minutes can be baked or driednatur.
12. Waxing &Polish
Can be sanded with abrasivepaper(#2000)first if necessaryThen use related products forwaxing and polishing
Notes:
1. After the (1k) primer is applied, the varnish can be sprayed
with only a suitable rest time. After the matte finish is appropriate
or dry, the rest time should not exceed 1.5 hours, otherwise
it will lead Play varnishes peeling.
2. If there is any dust particles on the painted surface, use
P1500-P2000 sandpaper, lightly grind, lightly spray 1 pass paint,
then spray varnish.
3. In case of high temperature, high humidity or large area
spraying, the amount of thinner may be increased or selected
special slow-drying thinner.
Saft Precautions :
1. Work in a well ventilated environment
2. Wear safety equipment
3. Keep paint thinner away from acid substances
4. Keep away from inflammable and explosive materials
5. It is forbidden to use paint thinner as general cleaner
6. Never smoke near